banner logo

Stoneridge Engineering is THE Source
for Rare and Beautiful Lichtenberg Figures!
(Page updated 09/14/22 - may change without notice)

Style 43 - 3" Diameter x 3/4" Disks with Flat Bottom

These three inch diameter sculptures have a 3/4" flat area on the bottom to prevent rolling when displayed in an upright position.  These were carefully irradiated and then discharged to create branching trees that originate from the flat base. Although the pattern and density may vary from specimen to specimen, we guarantee you will be delighted with yours. We recommend illuminating these with a CR35MC multicolor light base, or a LM2690 or LM2692 rosewood light base with white LED's.


Lit by LP3
(Click above for larger image)
 Specimen on LP3
(Click above for larger image)
 On LP3
(Click above for larger image)
Specimen on a multicolor light base
Another specimen on a multicolor light base
Another specimen on a multicolor light base
On LP3
(Click above for larger image)
 On LP3
(Click above for larger image)
 Discharge
(Click above for larger image)
Previous specimen on a multicolor light base
Another specimen on a multicolor light base
Similar disk being discharged during creation
 
Some Other Places to Visit:
Tesla Information Center
 Quarter Shrinker
 Link to 345 kV Switch MPEG
 10" Tesla Coil Deleware Quarter
Tesla Info Center
 		The "Quarter Shrinker"
 BIG Arcs & Sparks
10" Tesla Coil
 Get Shrunken Coins!

To Stoneridge Engineering Home



Copyright 1999-2022
All rights reserved.  No portion of this page may be reproduced without consent from the author.